losapt.blogg.se

Samsung ml 2510 printer blinking lights
Samsung ml 2510 printer blinking lights






samsung ml 2510 printer blinking lights

At the end of sliding the component outward you will need to carefully angle the part upward because there is a metal guide track at the upper most portion of the part which will prevent the part from disengagin from the track unless you angle the part upward at the very end of the slide. You can grab that handle to assist you to remove the part completely from the printer. You should see a pale green plastic handle on the top of this part.

samsung ml 2510 printer blinking lights

  • Carefully slide out the larger transfer belt component about 2/3 of the way out.
  • Put this whole component aside for later assembly back in. Once unlocked you carefully slide this part out. You must squeeze the level on the underside of this squarish handle to unlock it. Look caredfully at the diagram on this little handle.
  • Look for a portuding squarish handle below the larger blue handle transfer belt component.
  • Flip the large blue handle with the arrow upward. They are designed to loosen, but stay attached to the transfer belt component. One is on the left upper part, one is on the right.
  • There are two manual screws holding the transfer belt component securely.
  • Put the waste toner powder into a garbage bag.
  • Gently pry away the waste toner container from the printer.
  • Open the panel door exposing the toner waste container and cartridge access area.
  • How to solve error message "Printer Off or other problem" with SSC Utility.







  • Samsung ml 2510 printer blinking lights